This HOWTO was listed at
TuxMobil - Linux on Laptops, Notebooks, PDAs and Mobile Phones (Now replaced by: Fedora 9.)
I recently couldn’t resist in buying a notebook… To be precise, it’s an “Acer Aspire 5572 ZWXMi”. It came with Windows Vista Home Premium preinstalled. I played a bit with Vista and then decided to install Windows XP. That was easy and no fun at all. So I went for Linux and installed Ubuntu Feisty Fawn.
But first things first.
The hardware of this Acer Aspire is rather common for notebooks:
- Intel Pentium dual-core (T2060) @ 1.6 GHz
- 1024 MB RAM
- Integrated Graphics Intel 945GM
- Intel 82801G (ICH7 family) high definition audio
- Broadcom BCM 4318 WLAN
- Texas Instruments integrated 5 in 1 card reader
- 160 GB harddrive
Right away: everything works with Feisty (even suspend-to-RAM/suspend-to-disk) - at least as far as I know: I don’t use the card reader nor the integrated modem. I guess the former may work, the latter maybe won’t.
But now for installing Ubuntu 7.04…
To install Ubuntu you’ll need a connection to the internet. As we’ll make the WLAN chip work later, use a cable to connect the laptop to your router. Get the 32bit desktop edition of Feisty from here and boot it. Once on the desktop (don’t worry about the wrong screen resolution, we’ll fix this later) install Ubuntu by clicking on the “Install” desktop icon and follow the few simple instructions. When it comes to partitioning, I chose the manual way, because I wanted to keep the first partition sda1. I guess it holds data for restoring the original Vista OS. I created two more primary partitions for “swap” and
/ and an extended partition with two logical drives for
/home and another one for some data which I mount under
/media. But that depends on what you prefer.
After the first reboot - Ubuntu may run a filesystem check on this first reboot - you’ll be presented with the login screen in 1024x768 resolution.
Screen resolution and touchpad
One of the first things I turned off is the “tapping” ability of the touchpad, because it made me doubleclick on nearly every entry of the Gnome menu just by passing it. The other thing we want to fix, of course, is the screen resolution. The native resolution of the display would be 1280x800. Ubuntu makes this very easy for us. Open Synaptic package manager or install by command line:
“915resolution” will automatically probe for the right screen resolution and creates appropriate start scripts - no more action required!!
“gsynaptics” (or, if you prefer KDE “ksynaptics”) is a graphical frontend to configure your touchpad. To make this work, we need to add a few lines to “/etc/X11/xorg.conf”. So, use your favorite editor to edit the file:
Then add the following lines (just between the other input devices):
Then scroll down to ‘
Section "ServerLayout"’ and add
to this section. Now save the file and reboot. Upon reboot you will now see the correct screen resolution and you’ll find the touchpad configuration utility in your settings menu under “System”.
One thing which really drove me nuts was sound… The solution is very easy though: doubleclick on the speaker icon on the upper right near the clock of your Gnome desktop and the mixer will open. Go to “Edit -> Configure” and check “Surround”. You may now turn up the volume via the “Surround” slider.
To get WLAN working we need “ndiswrapper”. There is a native driver for the built-in Broadcom chip, but reading some posts on different forums made me prefer the Windows driver via ndiswrapper and I strongly recommend this way. (Original HOWTO by nbound on Ubuntu Forms can be found here - thanks!!!)
First we need to prevent Ubuntu from loading the native driver. Therefor we edit “/etc/modprobe.d/blacklist”:
Add the following line
save the file and unload the driver by:
Then, download the Windows XP driver from Acer Support and unzip the archive to a temporary directory. We’ll need the files in this driver archive later.
Now install “ndiswrapper”:
Once done, install the Windows driver by
See if everything went well:
Should return something like this:
Now check if ndiswrapper loads properly:
If that worked, add a new line to “/etc/modules”:
I don’t know if the next step is necessary, but I edited “/etc/network/interfaces”
and commented out every line with the exception of those for the loopback interface. So, I ended up with this:
You may now use the network-manager applet (upper right, near the clock) to connect to a wireless network. I had to play a little with it but it finally worked. If your WLAN doesn’t show up you may need to use the WLAN button at the front of your Acer Aspire and/or scan for networks via
Then your WLAN should show up. I have problems though when trying to connect to network which hides it’s ESSID, but I had the very same problem when running Windows on this laptop.
That’s it! You may now customize Ubuntu to your liking. I’d recommend installing “guarddog” as firewall for example, but that’s of course up to you.